Following is a partial list of the more common gases detected: Natural Gases: Propane, Butane, Methane, Acetone, Alcohol, Ammonia, Steam, Carbon Monoxide; Gasoline, Jet fuel, Hydrogen Sulfide, Smoke, Industrial Solvents, Lacquer thinner, Naphtha. ... Read more

$92.65 - $109.00

Pravco Store Fire Control Instruments ASD-P Smoke-Automatic Fire Detector Head Fire Control Instruments ASD-P Smoke-Automatic Fire Detector Head Model No: ASD-P Max Install Operating Temp 120 F (49.9 C)Smoke automatic fire detector head for use with duct housing DH500 Unit is new but missing original box Email or call 920-684-9999 w/questions PLEASE READ PRIOR TO BIDDING You are buying the above as is (If you are not sure what that means, look it up AS IS). This means don't assume anything. If  

$99.99

from

this is new and still sealed in the pack-- instructions are included package show light shelf life csbu-1 smoke detector base ask other questions you have  

$18.95

from

UOM: EA|Size: 4" H x 7" Diameter|Properties:|Protects alarms against possible damage|Ideal for public areas, garages, workshops, etc.|Circular and may be used with carbon monoxide detectors of equivalent size|Screws into wall or ceiling (Screws not provided)  

$17.95

from

FONT Up for auction we have a GAMEWELL PHOTOELECTRIC SMOKE SENSOR/DETECTOR ASD-PL2F GAMEWELL PHOTOELECTRIC SMOKE SENSOR/DETECTOR ASD-PL2F, ITEM IS BRAND NEW, NEVER BEEN USED, OPENED ONLY FOR PICTURES, ADDRESSABLE PHOTOELECTRIC, SMOKE HEAD I will start the bidding $$$EXTRA LOW$$$ For all you treasure hunters out there!!! PS: Be careful not to be outbid by last Minute Bidders: It's real easy.... eBay has a special proxy bidding system! If you just bid the absolute maximum you are willing to pay f  

$44.99

from

Floor Mount, Single Door Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$256.06

from

For Fabricating Almost Invisible Smoke Curtains From 3/4" (19 mm) Glass Glass is Mechanically Secured With Fasteners and Grommets Custom Drilling, Mitering, and Cutting Services Available CRL Heavy-Duty Smoke Baffle Base Shoe is designed to provide an almost invisible 3/4" (19 mm) tempered glass smoke curtain. Many of todays fire codes require large offices or retail areas to be broken down into smaller, more manageable areas that can be monitored by smoke detectors. This is the specific application for smoke baffles or curtains. Smoke curtains work to retain smoke in an area of a specified square footage. Some sprinkler systems are activated by a smoke alarm, so sectioning off areas through the use of smoke curtains can prevent unnecessary sprinkler activation.Extruded aluminum Heavy-Duty Smoke Baffle Base Shoe simply attaches to the ceiling structure so the glass can hang straight down. The glass is secured with screws going through nylon grommets (both included), that fit into 3/4" (19 mm) holes drilled in the glass on 12" (305 mm) centers. A glass fabrication template is included. Cladding in six architectural finishes is available.NOTE: Check your local building codes for regulations pertaining to ceiling area square footage and required depth specifications for smoke baffles or glass curtains.  

$991.81

from

Protects alarms against possible damage Ideal for public areas, garages, workshops, etc Circular and may be used with carbon monoxide detectors of equivalent size Screws into wall or ceiling (Screws not provided) Size: 4 H x 7" ", Manufacturer: Log  

$24.54

from

FONT Up for auction we have a GAMEWELL PHOTOELECTRIC SMOKE SENSOR/DETECTOR ASD-PL2FR GAMEWELL PHOTOELECTRIC SMOKE SENSOR/DETECTOR ASD-PL2FR, ITEM IS BRAND NEW, NEVER BEEN USED, OPENED ONLY FOR PICTURES, ADDRESSABLE PHOTOELECTRIC, SMOKE HEAD I will start the bidding $$$EXTRA LOW$$$ For all you treasure hunters out there!!! PS: Be careful not to be outbid by last Minute Bidders: It's real easy.... eBay has a special proxy bidding system! If you just bid the absolute maximum you are willing to pay  

$49.99

from

Wall Mount, Surface Applied Wiring Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers Recommended vertical location is on top rail of door ??? within 6" of lock stile edge Fits standard outlet box 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$163.13

from

For Fabricating Almost Invisible Smoke Curtains From 3/4" (19 mm) Glass Glass is Mechanically Secured With Fasteners and Grommets Custom Drilling, Mitering, and Cutting Services Available CRL Heavy-Duty Smoke Baffle Base Shoe is designed to provide an almost invisible 3/4" (19 mm) tempered glass smoke curtain. Many of todays fire codes require large offices or retail areas to be broken down into smaller, more manageable areas that can be monitored by smoke detectors. This is the specific application for smoke baffles or curtains. Smoke curtains work to retain smoke in an area of a specified square footage. Some sprinkler systems are activated by a smoke alarm, so sectioning off areas through the use of smoke curtains can prevent unnecessary sprinkler activation.Extruded aluminum Heavy-Duty Smoke Baffle Base Shoe simply attaches to the ceiling structure so the glass can hang straight down. The glass is secured with screws going through nylon grommets (both included), that fit into 3/4" (19 mm) holes drilled in the glass on 12" (305 mm) centers. A glass fabrication template is included. Cladding in six architectural finishes is available.NOTE: Check your local building codes for regulations pertaining to ceiling area square footage and required depth specifications for smoke baffles or glass curtains.  

$637.25

from

For Fabricating Almost Invisible Smoke Curtains From 3/4" (19 mm) Glass Glass is Mechanically Secured With Fasteners and Grommets Custom Drilling, Mitering, and Cutting Services Available CRL Heavy-Duty Smoke Baffle Base Shoe is designed to provide an almost invisible 3/4" (19 mm) tempered glass smoke curtain. Many of todays fire codes require large offices or retail areas to be broken down into smaller, more manageable areas that can be monitored by smoke detectors. This is the specific application for smoke baffles or curtains. Smoke curtains work to retain smoke in an area of a specified square footage. Some sprinkler systems are activated by a smoke alarm, so sectioning off areas through the use of smoke curtains can prevent unnecessary sprinkler activation.Extruded aluminum Heavy-Duty Smoke Baffle Base Shoe simply attaches to the ceiling structure so the glass can hang straight down. The glass is secured with screws going through nylon grommets (both included), that fit into 3/4" (19 mm) holes drilled in the glass on 12" (305 mm) centers. A glass fabrication template is included. Cladding in six architectural finishes is available.NOTE: Check your local building codes for regulations pertaining to ceiling area square footage and required depth specifications for smoke baffles or glass curtains.  

$637.25

from

Air Products Controls Smoke Alarm RW-AR-P Smoke Duct Detector Pilot Light Test/Reset Button NEW Stock ID #MI-77179-bb2 thru bb6 BEFORE YOU MAKE A PURCHASE, PLEASE READ ALL TERMS: Items that are listed as USED have not been tested, condition is unknown; item is being sold AS IS, unless otherwise specified in the items description . Any conditional notes will be listed in the additional information. This item is located in our warehouse in Troy, Michigan. Our warehouse hours are open by app  

$60.00

from

For Fabricating Almost Invisible Smoke Curtains From 3/4" (19 mm) Glass Glass is Mechanically Secured With Fasteners and Grommets Custom Drilling, Mitering, and Cutting Services Available CRL Heavy-Duty Smoke Baffle Base Shoe is designed to provide an almost invisible 3/4" (19 mm) tempered glass smoke curtain. Many of todays fire codes require large offices or retail areas to be broken down into smaller, more manageable areas that can be monitored by smoke detectors. This is the specific application for smoke baffles or curtains. Smoke curtains work to retain smoke in an area of a specified square footage. Some sprinkler systems are activated by a smoke alarm, so sectioning off areas through the use of smoke curtains can prevent unnecessary sprinkler activation.Extruded aluminum Heavy-Duty Smoke Baffle Base Shoe simply attaches to the ceiling structure so the glass can hang straight down. The glass is secured with screws going through nylon grommets (both included), that fit into 3/4" (19 mm) holes drilled in the glass on 12" (305 mm) centers. A glass fabrication template is included. Cladding in six architectural finishes is available.NOTE: Check your local building codes for regulations pertaining to ceiling area square footage and required depth specifications for smoke baffles or glass curtains.  

$991.81

from

Floor Mount, Single Door Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$281.66

from

Floor Mount, Single Door Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers Fits standard outlet box 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$331.37

from

Wall Mount, Surface Applied Wiring Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers Recommended vertical location is on top rail of door ??? within 6" of lock stile edge Fits standard outlet box 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$179.44

from

Floor Mount, Double Door Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers Recommended vertical location is on top rail of door ??? within 6" of lock stile edge 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$367.57

from

Wall Mount, Concealed Wiring (in a junction box) Designed for use with self-closing fire and smoke barrier doors Used independently or with any fire or smoke detector system When de-activated, helps control the spread of fire and smoke by automatically releasing doors from an open position for simultaneous closing Fail-safe device: When electrical power fails doors will release to close automatically Designed to work with SARGENT door closers Recommended vertical location is on top rail of door ??? within 6" of lock stile edge Fits standard outlet box 1" (25mm) extension included standard to increase armature projection to 2-5/8" (67mm) Sprayed Aluminum Enamel (BHMA 689) finish  

$149.00

from