The classic wrap-around works with the Alarm Lock 2700/T2 & 3000 Series Fully reversible Can be used for LH or RH locks 22 (.032) Gauge Finishes: Stainless 630 and Polished Brass 605  

$24.06

from

Deadlatch 2-3/8" Backset For all Trilogy Series DL Locks Bright Brass US3 Finish  

$16.80

from

Maintaining contact switch operated by manually rotating inserted key 90?? clockwise from open to closed position. Momentary contact switch locks feature spring return from closed to open position after 90?? clockwise key rotation to closed position. Contact configuration: SPST 7 amps (resistive) @ 125 Volts A.C. 7 amps @ 28 Volts D .C. Electrical Life: 6,000 cycles @ Max. Load. Contact Resistance: 50 milli ohms initial maximum. Two keys per lock. Master - Keying not available.  

$13.84

from

Hidden button in bottom of case retracts latch for the informed. Exposed dummy knob frustrates the unwelcome intruder. For use on "bank type" office gates where minimum security is required. Latch is reversible. Supplied with strike plate, mounting screws and dummy knob. Plated Chrome or Plated Brass finish.  

$20.94

from

Plug-In transformer TP-12-3: 12VAC-3AMP TP-24-2: 24VAC-1.5AMP  

$21.88

from

6 PIN SFIC Interchangeable Core Solid Brass Construction Reinforced Sleeve Design Combinated Core 2 keys included with each core Nickel Silver Blanks Slide cap cores available Keyed Alike or Keyed Different US26D or US4 finish  

$24.69

from

7 PIN SFIC Interchangeable Core Solid Brass Construction Reinforced Sleeve Design Uncombinated Core Slide cap cores available US26D finish  

$13.19

from

Faceplate Options 801 (4-7/8" x 1-1/4") For use with cylindrical locksets in ANSI metal jambs. For use with latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323 801A (4-7/8" x 1-1/4", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 802 (7-15/16" x 1-7/16") For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 803 (6-7/8" x 1-1/4", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum applications. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 805 (9" x 1-3/8", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Four point mounting f  

$16.25

from

Body???Brass, 1-5/32" diameter Furnished???with cam, cylinder collar Screw on cams for Plus IC Housings Length???1-1/8" 6 pin only; 1-1/4" 6 or 7 pin Staked cams for standard mortise cylinder housing US3, US10B and US26D finish  

$24.73

from

Constructed in heavy-duty cast brass. RB471 are ideal for use in situations where doors meet each other at approximate right angles (back to back). Replaceable rubber roller available. Finishes: Bright Brass US3, Satin Brass US4, Bright Chrome US26 and Satin Chrome US26D  

$13.95

from

Type 1 Inswing Door Strike  

$15.00

from

Plug In Type (DC) 120 volt primary AC, Corded output lead 12VDC - 12VA - 1.00 AMPS  

$19.95

from

Suitable for use on aluminium and steel doors. Outer shield ring is fully bevelled to offer poor grip for prying or twisting. If a tool such as a cold chisel is driven into the stile behind the shield ring, the cylinder is still protected by the retainer plate, which would have to be pulled through a round hole in the metal door stile. This degree of leverage would be impossible with most hand tools. As a standard mortice cylinder is made of brass, it is a potential weak point in narrow stile door security. The ring is manufactured from hardened steel, and coupled with its shape makes gripping the ring tightly virtually impossible. The MS?? 4043 may be used on outside only or on both outside and inside of a double-cylinder lock. Security rind, zinc-plated hardened steel. Finish: Powdercoat to match 130 (Aluminum Satin) and 121 (Dark Bronze)  

$19.75

from

Equipped with convenient screw-bracket mounting clamp for standard 1/2??? knockouts 120 volt primary AC 8VAC - 10VA - 1.25 AMPS 16VAC - 10VA - 0.62 AMPS 24VAC - 20VA - 0.83 AMPS  

$14.63

from

Equipped with convenient screw-bracket mounting clamp for standard 1/2??? knockouts 120 volt primary AC 8VAC - 20VA - 2.50 AMPS 16VAC - 30VA - 1.88 AMPS 24VAC - 30VA - 1.25 AMPS  

$17.29

from

Deadlatch 2-3/8" Backset For all Trilogy Series DL Locks Satin Chrome 26D Finish  

$16.80

from

Plug In Type Transformer (AC) 120 volt primary AC 24VAC - 20VA - 0.834 AMPS  

$14.63

from

Faceplate Options 801 (4-7/8" x 1-1/4") For use with cylindrical locksets in ANSI metal jambs. For use with latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323 801A (4-7/8" x 1-1/4", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 802 (7-15/16" x 1-7/16") For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 803 (6-7/8" x 1-1/4", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum applications. ANSI/BHMA???Numbers: #E05031, #E09321, #E09322, #E09323 805 (9" x 1-3/8", radius corners) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Four point mounting f  

$16.25

from

Provides a contemporary yet economical method of positive Hold-Open. Constructed in sturdy cast aluminum. Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. Provides a 1-5/8" throw for all types of doors. Ribbed non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. Finish: Aluminum US28  

$23.90

from

Constructed in cast of brass or aluminum. Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike. Unit requires manual disengagement to release Hold-Open. Replaceable resilient, non-marring rubber tip. WS449 is packed with wood screws for drywall mounting. Finishes: Bright Brass US3, Satin Brass US4, Satin Bronze US10, Dark Bronze US10B, Bright Chrome US26, Satin Chrome US26D and Satin Aluminum US28.  

$22.61

from