Pivot Hinge, Center Hung, Bearing Type Bronze Bearing, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion Frame Permitting, Holes Per Leaf 3, Pin Type -, 4 Holes, Load Capacity 500 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07032, Ul 10c, Mounting Floor, For Use With Interior And Exterior Doors  

$264.25

from

Pivot Hinge, Offset Hung, Bearing Type Bushings, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 90, Holes Per Leaf 4, Pin Type -, 6 Holes, Stanley Class Number -, Stanley Edp Number -, Standards Ansi No: 156.1 A8911, Ul 10c, Mounting Full Mortised  

$349.00

from

Pivot Hinge, Rh Offset Hung, Bearing Type Bushings, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 5, Standards Bhma/ansi No: C07321/c0732, Mounting Surface  

$179.50

from

Pivot Hinge, Rh Offset Hung, Bearing Type Bushings, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, 4 Holes, Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07172, Ul 10c, Mounting Side Jamb Attach  

$233.50

from

Electromagnetic Door Holder, High Hold, Opening Action Electromagnetic Release, Aluminum, Amp Draw @ 24v 0.25, Input Voltage 24, Projection From Wall 2 1/4 In., Total Projection 5 1/4 In., Holding Force 300 Lb., Armature Length Adjustable In., Sprayed Aluminum Finish, Standards Ansi/bhma 156.15,ul, Ul Of Canada, Cal. State Fire Marshal  

$552.00

from

Pivot Hinge, Lh Offset Hung, Bearing Type Bronze Bearing, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, Load Capacity 300 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07172, Ul 10c, Mounting Surface, For Use With Interior Doors  

$280.25

from

Single Acting, Handed Exterior or Interior Doors Weight to 450 lbs.* Door Width up to 4'0" (1219mm) Built-in positive dead stop prevents door from swinging beyond the desired opening degree (specify 90?? or 105??) Separate and independent valves for closing speed, latch speed and backcheck Available non-hold open (N) or selective hold open (S) at same degree as dead stop Cold weather fluid available ??? specify ???CWF??? (not available for closers with ???DA???) Cycolac, rustproof cement case Vertical door adjustment For fire rated openings (up to 3 hour assemblies) prefix ???F???. Fire rated closers cannot have PH option Furnished with wood and machine screws Less All Parts ??? Suffix LAP If a closer is needed for replacement, the arm, cover, cement case, top pivot and floor plate are omitted.  

$523.75

from

Electromagnetic Door Holder, Sliding Door, Opening Action Electromagnetic Release, Aluminum, Amp Draw @ 24v 0.08, Input Voltage 24, Projection From Wall 3 1/4 In., Total Projection 3 1/4 In., Holding Force 75 Lb., Sprayed Aluminum Finish, Standards Ansi/bhma 156.15,ul, Ul Of Canada, Cal. State Fire Marshal  

$524.50

from

CRL Satin Chrome Rixson® 28 Series Center-Hung Floor Mounted Closer Arm With Door Alignment Hardware This CRL Rixsonr Center-Hung Bottom Arm is for use with the Rixsonr 28+ Series+Floor+Mounted+Door+Closer. These arms are non-handed, and are supplied with exposed finished door alignment hardware. Non-Handed Center-Hung Applications Finished Mounting Hardware Included Catalog Number: 282026SC Also Available in These Catalogs: CRL83 Master Window and Door Catalog, PAGE W575 CRL63A Architectural  

$83.78

from

CRL Polished Brass Rixson® 3/4" Offset Top Pivot These CRL Rixsonr 3/4" Offset Top Pivots are supplied with a oil-impregnated bronze bearing and intended for use with standard wood, aluminum and hollow metal doors. These pivots are fully mortised and non-handed. They are supplied with wood and machine screws to allow most common installations. These pivots are available in four standard architectural finishes. Special finishes are available upon request. Oil-Impregnated Sintered Bronze Bearing  

$130.47

from

Lh Offset Shallow Depth Door Closer, 90 Deg. Hold-open, Bearing Type Brass, Material Aluminum, Color Satin Chrome Plated, Finish Satin, Height 2 In., Width 4-1/2 In., Pin Material -, Door Thickness 1-3/4 In., Range Of Motion 90, Holes Per Leaf 4, Pin Type -, Load Capacity 250 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Ansi/co6044, Mounting Concealed In Floor, For Use With Left-handed  

$1067.00

from

Pivot Hinge, Rh Offset Hung, Bearing Type Bronze Bearing, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, Load Capacity 300 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07172, Ul 10c, Mounting Surface, For Use With Interior Doors  

$280.25

from

Pivot Hinge, Lh Offset Hung, Bearing Type Bushings, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, 4 Holes, Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07321/c0731, Mounting Side Jamb Attach  

$238.25

from

Lh Offset Shallow Depth Door Closer, Non Hold-open Back Check, Bearing Type Brass, Material Aluminum, Color Satin Chrome Plated, Finish Satin, Height 2 In., Width 4-1/2 In., Pin Material -, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, Load Capacity 250 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Ansi/co6042, Mounting Concealed In Floor, For Use With Left-handed  

$1031.00

from

Rh Offset Shallow Depth Door Closer, 90 Deg. Hold-open, Bearing Type Brass, Material Aluminum, Color Satin Chrome Plated, Finish Satin, Height 2 In., Width 4-1/2 In., Pin Material -, Door Thickness 1-3/4 In., Range Of Motion 90, Holes Per Leaf 4, Pin Type -, Load Capacity 250 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Ansi/co6043, Mounting Concealed In Floor, For Use With Right-handed  

$1067.00

from

Pivot Hinge, Rh Offset Hung, Bearing Type Bronze Bearing, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 4, Pin Type -, Load Capacity 450 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07172, Ul 10c, Mounting Bottom/side Mortised  

$380.00

from

Pivot Hinge, Rh Offset Hung, Bearing Type Bronze Bearing, Material Brass, Color Aluminum, Finish Satin Chrome, Pin Material Hardened Steel, Door Thickness 1-3/4 In., Range Of Motion 180, Holes Per Leaf 8, Pin Type -, Load Capacity 1000 Lb., Stanley Class Number -, Stanley Edp Number -, Standards Bhma/ansi No: C07172, Ul 10c, Mounting Bottom Directly To Floor  

$543.00

from

Standard top pivot 180 included 119 or M19 intermediate pivots are recommended (order separately) Bottom pivot mortised into side jamb Not available for fire-rated door Pivot set can be vertically adjusted up to 3/16" (5mm) after installation without the use of shims Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot Non-ferrous base material 3/4" (19mm) offset (measured from centerline of pivot to face of door) Door edges must be beveled 1/8" in 2" Weight of door is borne by floor portion Furnished with wood and machine screws Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard Doors will swing 180??, trim permitting  

$101.50

from

Electromagnetic Door Release, Voltage Rating 120 Vac, 24 Volts Ac/dc And 12 Vdc, Projection From Wall 7/8 Inches, Total Projection 3 1/2 Inches, Wiring Concealed, Finish Aluminum  

$202.75

from

Double Acting, Non-handed Interior or Exterior Doors Weight to 300 lbs. Centering arm with adjustment screws in faces of door (critical for double acting doors) Adjustable closing speed valves for each direction of door swing Mechanism returns door to center Available non-hold open (N) at 90?? (requires 93?? swing) Not available in Delayed Action (DA) Maximum door opening 103?? Auxiliary door stop required, overhead or floor type Available with floor plate or threshold installation Steel cement case Standard top pivot: #340 included Not allowed for fire rated doors Furnished with wood and machine screws Finishes: 613 Oil Rubbed Bronze and 626 Satin Chrome  

$937.50

from