Product Features: Transmission Line: Analog ... Read more

$98.95 - $185.00

... Read more

$170.00 - $199.00

... Read more

$269.00 - $275.00

... Read more

$182.00 - $474.00

... Read more

$899.00 - $4499.00

... Read more

$329.00 - $447.00

... Read more

$69.00 - $321.00

Digium AEX2400P Analog PCI Card Features: 50 pin RJ21 interface for connecting analog telephones or POTS lines Full-length analog PCI board Provides six module banks that support Quad FXS and Quad FXO modules High Performance Echo Cancellation (HPEC) Software (optional) Can add optional hardware echo cancellation module (VPMADT032) Note: For use only with PCI Express (PCIe) 1.0 compliant slot - x1, x4, x8, or x16, [x1 shown in slot 4 below] One Year Warranty  

$360.00

from

Digium AEX410PLF (0 FXS/0 FXO) Card The Digium AEX410 is a half-length PCI-Express x1 modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines. Using Digium's Asterisk software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system. Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus Technology, the AEX410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional AEX410 or other Digium analog interface cards.  

$240.00

from

Digium TDM2400P Analog PCI Card Features: 50 pin RJ21 interface for connecting analog telephones or POTS lines Full-length analog PCI board Provides six module banks that support Quad FXS and Quad FXO modules High Performance Echo Cancellation (HPEC) Software (optional) Can add optional hardware echo cancellation module (VPMADT032) Note: For use only with a 3.3V or 5.0V PCI slot. PCI 2.2 or higher compliant; see slots 1, 2, and 3 below One Year Warranty  

$345.00

from

Nortel NT8D19AA Memory/Peripheral Signaling Card Features: NT8D19AA Memory/Peripheral Signaling Card  

$175.00

from

Performs maintenance functions for Definity Functions include Packet Bus reconfiguration that allows diagnosis and correction of recoverable Packet Bus failures before Link Access Procedure on the D-Channel (LAPD) links fail - ISDN - PRI testing that originates and terminates loopback tests on ISDN facilities TN 771D is required in all standard reliability Primary Port Networks (PPNs) and critical reliability Expansion Port Networks (EPNs). All standard reliability PPNs when packet endpoints (BRI and/or ASAI) are supported  

$97.00

from

Digium TDM400P Analog PCI Card Features: 4 RJ-11 ports for connecting analog telephones or POTS lines Half-length analog PCI board Can add up to 4 FXS or 4 FXO modules PCI 2.2 or higher compliant One Year Warranty Note: For use only with a 3.3V or 5.0V PCI slot (PCI 2.2 or higher compliant; see slots 1, 2, and 3 below)  

$89.00

from

Digium AEX808B (0 FXS/8 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk (X100M) modules, enabling the creation of any combination of ports The optional VPMADT032 hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both types of analog interfaces. If the hardware echo cancellation module is not installed, the AEX800 may be used in conjunction with Digium's High Performance Echo Cancellation (HPEC) software, a commercial and toll quality hybrid echo cancellation solution. Digium's HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software. Using this card in concert with Digium's Asterisk software, standard PC hardware, and the Linux OS, you can create SMB or SOHO telephony environments capable of satisfying the needs of small or medium business applications at an industry-leading price.  

$665.00

from

Acculink/Paradyne 3164 CSU/DSU connects to T1 and FT1 network services from fractional Nx56/64 Kbps speeds up to 1.544 Mbps Independently configurable Nx56/64 Kbps ports DSX-1 drop and insert port 2x16 LCD display for configuration and status Remote operation and automatic dial-out alarm condition through integral V.22bis modem Multiple power source options Integral BERT: QRSS, 511 and 1 in 8 Six different loopbacks (supports V.54 loopbacks, type 2 and 3) Three sets of Bantam test jacks Four data ports on EIA-530-A interfaces.  

$1575.00

from

Digium S400M FXS Module Features: Activates four analog ports on TDM800P and TDM2400P analog cards Allows termination of analog telephone stations Passes all the call features any standard analog telephone will support Modular design allows you to easily activate additional ports on your analog card One Year Warranty  

$195.00

from

Digium AEX820B (2 FXS/0 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk (X100M) modules, enabling the creation of any combination of ports The optional VPMADT032 hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both types of analog interfaces. If the hardware echo cancellation module is not installed, the AEX800 may be used in conjunction with Digium's High Performance Echo Cancellation (HPEC) software, a commercial and toll quality hybrid echo cancellation solution. Digium's HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software. Using this card in concert with Digium's Asterisk software, standard PC hardware, and the Linux OS, you can create SMB or SOHO telephony environments capable of satisfying the needs of small or medium business applications at an industry-leading price.  

$397.00

from

Digium AEX412EF (1 FXS/2 FXO) Card w/Echo Cancellation The Digium AEX410 is a half-length PCI-Express x1 modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines. Using Digium's Asterisk software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system. Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus Technology, the AEX410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional AEX410 or other Digium analog interface cards.  

$604.00

from

Digium AEX822B (2 FXS/2 FXO) PCI-e Card The AEX800 is a half-length PCI-Express 1.0-compliant, 8 port analog interface card. It supports combinations of station and/or trunk/line modules for a total of eight (8) interfaces. Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure. The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk (X100M) modules, enabling the creation of any combination of ports The optional VPMADT032 hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both types of analog interfaces. If the hardware echo cancellation module is not installed, the AEX800 may be used in conjunction with Digium's High Performance Echo Cancellation (HPEC) software, a commercial and toll quality hybrid echo cancellation solution. Digium's HPEC provides 16ms to 128ms of selectable near-end ITU G.168 compliant echo cancellation in software. Using this card in concert with Digium's Asterisk software, standard PC hardware, and the Linux OS, you can create SMB or SOHO telephony environments capable of satisfying the needs of small or medium business applications at an industry-leading price.  

$485.00

from

Digium TDM2404EF (0 FXS/16 FXO) PCI Card w/Echo Cancellation The Wildcard TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines. Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system. Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The quad-FXO and quad- FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both FXO and FXS interfaces. Scaling of this solution is accomplished by adding additional TDM2400P cards. Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules. Suggested Hardware and Software Requirements 1.4GHz Pentium 4 or better with 64MB RAM Available full-length PCI slot  

$1280.00

from