This is the original portable impact cutter invented by MORSE-STARRETT, designed with one purpose: to cut wire rope. These cutters are designed to cut without affecting the original roundness of your wire rope. Plus the blade and dies are made from the best tool steel available. So remember when you... Read more

$108.99 - $108.99

48H harvester chain is built to handle the most demanding harvesting conditions operators face. Rivets are injection lubricated prior to manufacturing to lessen stretching. Long cutters have industrial grade chrome coatings to give you longer periods between sharpenings. 48H harvester chain is .080 ... Read more

$259.99 - $259.99

... Read more

$399.99 - $399.99

... Read more

$179.99 - $179.99

... Read more

$149.99 - $149.99

... Read more

$119.99 - $119.99

... Read more

$169.99 - $169.99

48H harvester chain is built to handle the most demanding harvesting conditions operators face. Rivets are injection lubricated prior to manufacturing to lessen stretching. Long cutters have industrial grade chrome coatings to give you longer periods between sharpenings. 48H harvester chain is .080 ... Read more

$159.99 - $159.99

Simply the best chainsaw bar made. If you are serious about the equipment you run, this is the bar for you. All bars are hand made from the finest steel, which is cold rolled, heat treated, annealed, stress relieved and surface ground to provide the best possible characteristics of wear resistance, ... Read more

$149.99 - $149.99

48H harvester chain is built to handle the most demanding harvesting conditions operators face. Rivets are injection lubricated prior to manufacturing to lessen stretching. Long cutters have industrial grade chrome coatings to give you longer periods between sharpenings. 48H harvester chain is .080 ... Read more

$399.99 - $399.99

Simply the best chainsaw bar made. If you are serious about the equipment you run, this is the bar for you. All bars are hand made from the finest steel, which is cold rolled, heat treated, annealed, stress relieved and surface ground to provide the best possible characteristics of wear resistance, ... Read more

$149.99 - $149.99

... Read more

$109.99 - $109.99

... Read more

$129.99 - $129.99

Simply the best chainsaw bar made. If you are serious about the equipment you run, this is the bar for you. All bars are hand made from the finest steel, which is cold rolled, heat treated, annealed, stress relieved and surface ground to provide the best possible characteristics of wear resistance, strength, durability, straightness and elasticity. Rails are hand ground, not milled, to an accuracy of .002 of an inch for straighter cuts. Rails are also flame hardened to 5 points more than the saw chain itself. Comes with a single rivet replaceable sprocketnose. The results are obvious. You get hand made quality that leads to less downtime and frustration. Try one and you will see why WoodlandPRO is your best professional choice.  

$129.99

from

Dixie Industries lifting tongs are made in Tennessee from high quality forged alloy steel. Lifting tongs are used to lift logs and poles into place. Lifting tongs are certified and tested for overhead lifting. Dixie Industries lifting tongs are proof loaded to two (2) times the Working Load Limit (WLL) then affixed with a permanent metal identification tag. WARNING: Do not overload tongs. Do not use lifting tongs for lifting over people. Do not use to transport people or to transport or suspend load over people. Inspect tongs prior to each use.  

$489.99

from

WoodlandPro 30SC is a great chain for casual users as well as professionals working in dirty cutting conditions. This chain will not cut as fast as chisel chain, but it is much more forgiving if it contacts abraisive materials like dirt and sand. Works well in both hardwoods and softwoods. Chain is .375 pitch, .050 gauge, semi-chisel. 30SC will fit saws using Oregon 72 series and Stihl 33 series chains. We also offer this chain in a skiptooth version for longer bars (WP375 30SCS). 30SC chain sharpens with a 7/32" round file or 3/16" grinding wheel. Chain manufactured in the U.S.A. by Carlton. 100' Reel comes with 25 presets and tie straps We recommend using WoodlandPro Spinner Breaker Combo to properly assemble loops when buying chain in bulk.Pitch .375" (3/8)Gauge .050" (1.3mm)Sequence StandardCutter Type Semi-Chisel Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)Kickback Reduction Features NoneANSI Approved Low Kickback Chain No100' Reel Contains 1640 Drive LinksWARNING: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.  

$269.99

from

These double-end saw bars can be used with either two powerheads or a helper handle. All of our double ended bars come stock fitting the extra large Stihl mount (084 etc). They do come with adapters to fit the standard Stihl mount and large Husqvarna mount.  

$319.99

from

This is the original portable impact cutter invented by MORSE-STARRETT, designed with one purpose: to cut wire rope. These cutters are designed to cut without affecting the original roundness of your wire rope. Plus the blade and dies are made from the best tool steel available. So remember when you need the job done in the field or your shop - get the best - MORSE-STARRETT.  

$169.99

from

30RCS is the skip tooth version of our popular 30RC chain. Usually used with bars 24" and longer. Chisel cutters work well in both softwoods and hardwoods. 30RCS works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. Chain is .375 pitch, .050 (1.3mm) gauge. 30RCS fits saws using Oregon 72 and Stihl 33 series chain. 30RCS chain sharpens with a 7/32" round file or 3/16" grinding wheel. Chain manufactured in the U.S.A. by Carlton. 100' Reel comes with 25 presets and tie straps We recommend using WoodlandPro Spinner Breaker Combo to properly assemble loops when buying chain in bulk. SpecificationsPitch 3/8" (.375") Gauge .050" (1.3mm)Sequence SkiptoothCutter Type Chisel Recommended Saw Sizes 3.0-6.0 cubic inches (50-100cc)Recommended Bar Lengths 16"-36" (40-90cm)Kickback Reduction Features NoneANSI Approved Low Kickback Chain No100' Reel Contains 1640 Drive LinksWarning: This saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.  

$269.95

from

Simply the best chainsaw bar made. If you are serious about the equipment you run, this is the bar for you. All bars are hand made from the finest steel, which is cold rolled, heat treated, annealed, stress relieved and surface ground to provide the best possible characteristics of wear resistance, strength, durability, straightness and elasticity. Rails are hand ground, not milled, to an accuracy of .002 of an inch for straighter cuts. Rails are also flame hardened to 5 points more than the saw chain itself. Comes with a single rivet replaceable sprocketnose. The results are obvious. You get hand made quality that leads to less downtime and frustration. Try one and you will see why WoodlandPRO is your best professional choice.  

$109.99

from