... Read more

$319.93 - $319.93

... Read more

$287.03 - $287.03

... Read more

$158.55 - $158.55

... Read more

$138.77 - $138.77

... Read more

$101.09 - $101.09

... Read more

$535.44 - $535.44

... Read more

$126.93 - $126.93

... Read more

$305.02 - $305.02

1-1/4-12 H4 6FL BOTT CLEV HSS HAND TAP  

$166.08

from

Click to Enlarge Click to Enlarge Click to Enlarge 2" x 2" x 8" x 11-3/4" 8Flute Cobalt Coarse Square End Mill MSRP: $410.41 Mill Diameter (Inch) 2 Material Cobalt Pitch Coarse Length of Cut (Inch) 8 Finish/Coating Uncoated Overall Length (Inch) 11-3/4 End Type Square End Number of Flutes 8 Shank Diameter (Inch) 2 Centercutting (Yes/No) No Extended Reach (Yes/No) No Material Grade M42 Single or Double End Single Cutting Direction Right Hand Flute Direction Right Hand Shipping weight: 8 lbs Indu  

$239.72

from

The Cleveland 2075A wide land, parabolic, jobber-length drill bit is made of cobalt, has 135-degree notched-point geometry and TiAlN surface treatment, and is suitable for deep hole drilling with precision holes. This series has higher speeds and feeds for increased productivity over standard drill bits. The round shank diameter is the same as the drill size. The 2075A series has a wide land parabolic flute design that enhances chip removal. The coolant has a better flow to the drill point for heat dissipation, and can be used at higher speeds and feeds for increased productivity. The TiAlN coating resists heat better than TiN and TiCN coatings, helping increase tool life and performance. It also has increased hardness compared to TiN and may reduce the need for lubricants based on the application. The wider land increases the torsional strength of the drill which increases the hole tolerance for high precision work. This series of drill bits are suitable for drilling into stainless steel, carbon steel, cast iron, aluminum, brass, plastic and nickel alloys. The spiral flutes act as a passageway for chip removal. The right-hand twist brings chips up and away from the cutting edge. The jobber length offers a good compromise between reach and rigidity. The inch sizes are manufactured to American National Standards Institute (ANSI) specification and metric sizes are manufactured to Deutsches Institut für Normung (DIN) 338 specifications. The 135-degree notched-point drill geometry ensures a more accurate hole by reducing walking when the hole is started. The notched point can withstand higher thrust loads, like those encountered when drilling tough alloys, than conventional point geometry. The tolerances for various aspects of the Cleveland drill bits are: drill diameter range 0” to 1/8” +0.0000”/-0.0005”, over 1/8” to 1/4” +0.0000”/-0.0007”, over 1/4” to 1/2” +0.0000”/-0.0010”, over 1/2” to 1” +0.0000”/-0.0012”, over 1” to 2” +0.0000”/-0.0015”, over 2” to 3 1/2” +0.0000”/-0.0020”; drill overall length and flute length #80 through 1/8” +0.1250”/-0.0626”, over 1/8” to 1/2” +0.1250”/-0.1250”, over 1/2” to 1” +0.2500”/-0.1250”, over 1” to 2” +0.2500”/-0.2500”, over 2” to 3 1/2” +0.3750”/-0.3750”; drill point angle diameter range 1/16” to 1/2” included angle 118 or 135 degrees +/-5 degrees, over 1/2” to 1 1/2” included angle 118 degrees +/-3 degrees, over 1 1/2 to 3 1/2 includes angle 118 degrees +/- 2 degrees; drill lip height diameter range 1/16” to 1/8” total indicator variation 0.0020”, over 1/8” to 1/4” total indicator variation 0.0030”, over 1/4” to 1/2” total indicator variation 0.0040”, over 1/2” to 1” total indicator variation 0.0050”, over 1” to 3 1/2” total indicator variation 0.0060”. Drill bits are cutting tools used to make holes in a range of materials. They are used in machines such as handheld portable drills, drill presses, machining centers, and lathes. Drill bits come in a variety of types and lengths. Twist drill bits are the most common type of drill bit. They are a round, twisted shaft, end-cutting tool with two or more cutting edges and two or more flutes. Jobber drill bits are the most common length of twist bit. They offer a good comprise of length and reach to work with the widest range of materials and applications. Greenfield Industries manufactures tools under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The company, owned by Top-Eastern Group and headquartered in Seneca, SC, makes tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut für Normung (DIN) standards.  

$151.39

from

1-1/8-12 H4 4FL BOTT CLEV HSS HAND TAP  

$131.73

from

Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Cleveland C06469 23/64" 3947 12" Extension Drill Black Oxide HSS 135º Split Straight Shank Manufacturer: Cleveland Twist Drill Model #C06469 / 3947 Diameter: 23/64" Overall Length: 12" Coating: Black Oxide Material: HSS Point: 135º You are bidding on one box of 3 Extension Drills Get these here today from Industry Recycles for less money and also enjoy FREE SHIPPING IN THE USA !!! INTERNATIONAL SHIPPING is USPS Priority mail.  

$58.52

from

Number of Flutes 4 Chamfer Plug Material High Speed Steel Finish/Coating Bright Thread Direction Left Hand Oversize (Yes/No) No Through Coolant (Yes/No) No Thread Standard UNC Overall Length (Inch) 6-1/16  

$158.99

from

The Cleveland 2075A wide land, parabolic, jobber-length drill bit is made of cobalt, has 135-degree notched-point geometry and TiAlN surface treatment, and is suitable for deep hole drilling with precision holes. This series has higher speeds and feeds for increased productivity over standard drill bits. The round shank diameter is the same as the drill size. The 2075A series has a wide land parabolic flute design that enhances chip removal. The coolant has a better flow to the drill point for heat dissipation, and can be used at higher speeds and feeds for increased productivity. The TiAlN coating resists heat better than TiN and TiCN coatings, helping increase tool life and performance. It also has increased hardness compared to TiN and may reduce the need for lubricants based on the application. The wider land increases the torsional strength of the drill which increases the hole tolerance for high precision work. This series of drill bits are suitable for drilling into stainless steel, carbon steel, cast iron, aluminum, brass, plastic and nickel alloys. The spiral flutes act as a passageway for chip removal. The right-hand twist brings chips up and away from the cutting edge. The jobber length offers a good compromise between reach and rigidity. The inch sizes are manufactured to American National Standards Institute (ANSI) specification and metric sizes are manufactured to Deutsches Institut für Normung (DIN) 338 specifications. The 135-degree notched-point drill geometry ensures a more accurate hole by reducing walking when the hole is started. The notched point can withstand higher thrust loads, like those encountered when drilling tough alloys, than conventional point geometry. The tolerances for various aspects of the Cleveland drill bits are: drill diameter range 0” to 1/8” +0.0000”/-0.0005”, over 1/8” to 1/4” +0.0000”/-0.0007”, over 1/4” to 1/2” +0.0000”/-0.0010”, over 1/2” to 1” +0.0000”/-0.0012”, over 1” to 2” +0.0000”/-0.0015”, over 2” to 3 1/2” +0.0000”/-0.0020”; drill overall length and flute length #80 through 1/8” +0.1250”/-0.0626”, over 1/8” to 1/2” +0.1250”/-0.1250”, over 1/2” to 1” +0.2500”/-0.1250”, over 1” to 2” +0.2500”/-0.2500”, over 2” to 3 1/2” +0.3750”/-0.3750”; drill point angle diameter range 1/16” to 1/2” included angle 118 or 135 degrees +/-5 degrees, over 1/2” to 1 1/2” included angle 118 degrees +/-3 degrees, over 1 1/2 to 3 1/2 includes angle 118 degrees +/- 2 degrees; drill lip height diameter range 1/16” to 1/8” total indicator variation 0.0020”, over 1/8” to 1/4” total indicator variation 0.0030”, over 1/4” to 1/2” total indicator variation 0.0040”, over 1/2” to 1” total indicator variation 0.0050”, over 1” to 3 1/2” total indicator variation 0.0060”. Drill bits are cutting tools used to make holes in a range of materials. They are used in machines such as handheld portable drills, drill presses, machining centers, and lathes. Drill bits come in a variety of types and lengths. Twist drill bits are the most common type of drill bit. They are a round, twisted shaft, end-cutting tool with two or more cutting edges and two or more flutes. Jobber drill bits are the most common length of twist bit. They offer a good comprise of length and reach to work with the widest range of materials and applications. Greenfield Industries manufactures tools under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The company, owned by Top-Eastern Group and headquartered in Seneca, SC, makes tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut für Normung (DIN) standards.  

$100.49

from

Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.  

$119.20

from

CLEVELAND #120 TWIST DRILL, 2565T, 12MM (.4724), HSS, PARABOLIC STRAIGHT SHANK, 7.75 OL, W/GM TANG TINCOAT ***LOT OF 21 TWIST DRILLS*** THIS ITEM IS NEW IN ORIGINAL MFG. PACKAGING. Ideal Item #DNFW-05861 Bay Loc:VID-18-02 Pic:P1140511 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.  

$577.50

from

Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.  

$212.71

from

Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Cleveland Twist Drill OAL: 6-1/2 LOC: 4 Flutes: 3 Flute Type: Spiral Shank Dia. : 1-1/4 Material: Cobalt Powder Metel Coating: TiCN Model # C40439 MSRP: $295.00 You are buying one Cleveland Twist End Mill. Item seems to be unused surplus in container. Free Shipping! Shipping Weight: 2 Lbs. Shipping Dimensions: 2" x 2" x 8" Industry Recycles is much more than just another seller, We are one of the first companies to innovate the  

$219.99

from

Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.  

$342.39

from